INSTALLING A MODERN SHOWER UNIT: SWIFT GUIDANCE FOR SUCCESS

Installing a Modern Shower Unit: Swift Guidance for Success

Installing a Modern Shower Unit: Swift Guidance for Success

Blog Article

Book Your Appointment

This post in the next paragraphs on the subject of How to Install a Direct-to-Stud Shower Enclosure is totally stimulating. Don't miss it.


How to Install a Direct-to-Stud Shower Enclosure
An effective shower installation needs careful planning and also a lot of work. Most of the times, you will need to do 3 types of tasks: mounting walls, installing the plumbing, and also ending up walls.

Prep work


Firstly, you have to pick the kind of shower that you want to set up. It is very important to determine whether the chosen shower can handling particular systems and can manage a secure level of water via the boiler. The majority of shower devices nowadays are created to be adaptable to various water pressures (such as stored warm water as well as cold mains).
It is also crucial to consider the water stress and also the planning of the piping as well as water drainage for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The tube and spray parts of the push-on mixer shower system can be linked to the bathroom faucet based on your requirement, as well as the water temperature can be changed through the faucets. Push-on mixers are cheap and exceptionally simple to install. However, although the hose link is straightforward, it is quickly removed. Furthermore, it is troublesome to readjust the temperature level.

  • Bath/Shower Mixer: The hose and spray of this kind of shower are integrated with a bathroom mixer tap, and also the temperature level can be adjusted with the bathroom taps. It is a really economical option as well as no extra plumbing is involved. Nonetheless, the bath/shower mixers additionally deal with bothersome temperature control choices.

  • Manual Mixer: The tube and also spray of a hands-on mixer shower device belong of the wall surface system and also the hot and cold water products are connected to a single valve The temperature level and pressure of the water are regulated through either one or a variety of knobs (in a lot more pricey showers). Although temperature level control is much easier in manual mixer types, they are a lot more costly than the formerly mentioned mixers. They also require additional plumbing of hot and cold water supply pipelines.

  • Thermostatic Mixer: The tube and also spray of this shower type are a part of the wall surface system and also the hot and cold water supplies are connected to a single shutoff below as well. It is full with an integrated stabiliser to self-adjust the water temperature level and to avoid it from becoming as well hot. One of the most significant advantages of a thermostatic mixer shower type includes practical temperature control. However, it is the most pricey of the different mixer choices.

  • Power Shower: A power shower is a solitary system having a powerful electrical pump that is capable of changing both the water stress and also temperature level. This kind of shower can be fitted if there is water supply from a cold water cistern as well as a hot water cylinder. A power shower makes the change of both stress as well as temperature level very easy. On the other hand, it is unsuitable for water heated directly by the shower or where the water is provided by a mix central heating boiler under mains pressure.

  • Electric Shower: An electric shower is plumbed into a mains cold water supply as well as it warms the water electrically. It is very important to keep in mind that for this shower kind to be installed, the mains stress needs to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The system enables the temperature and stress to be changed using a knob. Models with temperature level stabilisers are better as they stay unaffected by various other taps somewhere else in operation within the household. A significant drawback of electric showers is that the control handle only permits the choice of high temperatures at much less pressure, or reduced temperature levels at a higher pressure. This is problematic in the winter when the spray is frequently weak and also the keys water is colder. Nevertheless, this trouble is taken on in some models which are offered with a winter/summer setting.


  • Approach


    Depending upon the kind of shower you desire to install, the shower head should either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it must have a check valve.
    Prior to starting, it is advisable to mark the positions of the shower head as well as control, as well as to prepare the pipe-work entailed. Furthermore, the drain system to eliminate the waste water will certainly require to be planned. Both positions of the cable route and also the shower button will certainly additionally need to be considered if a rapid or electric shower device is being set up.
    Utilize the instruction overview offered with the shower unit to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is very important to remove the supply of water. In order to protect the pipes, they must be offered a water resistant covering as well as additionally fitted with separating shutoffs. The pipes can then be hidden right into the wall and plastered over to neaten the general appearance.
    Fit the base tray, shower head, and also fittings.
    Link the primary shower control to the pipelines that will certainly be providing the water (This might need a female screw thread adapter).
    Reconnect the supply of water and test the pipelines for any kind of leakages, as some may need tightening up.
    If you are installing an electrical shower, remember to turn off the power supply prior to making any type of electrical links. When these connections have been made (there need to be support within the instruction manual), the power supply can be switched over back on.

    Adjusting Water Stress to Match Your Shower


    The cold water storage tank can be raised to a higher elevation (often as low as 150mm (6inches)) by installation a strong wood assistance below it - perhaps composed of struts and also blockboards. If you choose this alternative, the main and distribution pipes will certainly additionally have to be raised to meet the new height of the storage tank.
    Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it needs to be attached into the power supply in order to operate.

    Piping as well as Drain


    It is best to utilize 15mm diameter supply pipelines, as well as make the runs to the shower as brief and also straight as possible so as to keep optimal stress as well as reduce warm loss. Furthermore, by minimising using elbow joints for pipe corners, you can lower the resistance in the circulation of the supply of water. You can attain this by bending the pipes instead.

    A Lot Of Common Blunders


  • Breaking or neglecting local code constraints.

  • Utilizing pipes that are also small.

  • Connecting copper to galvanized without utilizing a brass or dielectric suitable in between both.

  • Not using tape or pipe compound at threaded joints.

  • Uneven your components when mounting them.

  • Not installing an air gap filling up for fixtures.

  • Cutting supply stub outs as well short to set up the shutoff valves onto after the completed wall remains in area.

  • Not correctly straightening tubing right into installations or quit valves. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will certainly trigger a leak.).

  • When turning the water back on in your home, constantly run the outside hose pipe valve or flush your commodes to hemorrhage dirt as well as air from the lines. This debris can trigger issues in your sink faucets and various other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    Simple ways to Install a Shower Cubicle on Your Own

    I have been very serious about How to Install a Direct-to-Stud Shower Enclosure and I really hope you enjoyed reading the post. If you please take the time to promote this blog post if you appreciated it. Thanks a lot for taking the time to read it.


    Request An Appointment

    Report this page